Recent posts

Get Empowered: Review Window and the Processing Method | Tip #37

By October 4, 2017
Empower tip-of-the-week

Tip 37: Working with misidentified chromatographic peaks due to retention time shifts, part 2: The Manually Identify Peaks tool

Categories: Empower Tip-of-the-Week, Technologies
Tags: , , , , , ,

Get Empowered: Review Window and the Processing Method | Tip #36

By September 27, 2017
Empower tip-of-the-week

Tip 36: How to work with chromatographic peaks that have been misidentified due to retention time shifts using Empower Software (Part 1).

Categories: Empower Tip-of-the-Week
Tags: , , , , , ,

Get Empowered: Review Window and the Processing Method | Tip #35

By September 20, 2017
Empower tip-of-the-week

Tip 35: How to use the Contour Plot in Empower Software to extract chromatograms and spectra from 3D PDA.

Categories: Empower Tip-of-the-Week
Tags: , , , , , , ,

Get Empowered: Review Window and the Processing Method | Tip #34

By September 12, 2017
Empower tip-of-the-week

Tip 34: How to extract chromatograms and spectra from 3D PDA data in Empower Software.

Categories: Empower Tip-of-the-Week
Tags: , , , , , , ,

Get Empowered: Review Window and the Processing Method | Tip #33

By September 7, 2017
Empower tip-of-the-week

Tip #33: How to use an older calibration curve to quantitate samples in Empower Software.

Categories: Empower Tip-of-the-Week
Tags: , , , , , ,

Get Empowered: Review Window and the Processing Method | Tip #32

By August 29, 2017
Empower tip-of-the-week

This tip will demonstrate how to overlay a chromatogram at a particular wavelength from two different 3D PDA channels in Empower Software.

Categories: Empower Tip-of-the-Week
Tags: , , , , , , ,

Get Empowered: Review Window and the Processing Method | Tip #31

By August 23, 2017
Empower tip-of-the-week

How to calculate a chromatogram’s signal-to-noise ratio using Empower Software’s custom calculations feature. (S/N Part 4)

Categories: Empower Tip-of-the-Week
Tags: , , , , , ,

Get Empowered: Review Window and the Processing Method | Tip #30

By August 15, 2017
Empower tip-of-the-week

See how to calculate signal-to-noise ratios for pharmacopeial methods where you’re calculating noise from a blank injection. (S/N Part 3)

Categories: Empower Tip-of-the-Week
Tags: , , , , , ,

Get Empowered: Review Window and the Processing Method | Tip #29

By August 9, 2017
Empower tip-of-the-week

There are two ways Empower Chromatography Data Software can calculate signal-to-noise (S/N) ratio adhering to the pharmacopeia. This tip will address calculating noise from within the chromatogram. (S/N Part 2)

Categories: Empower Tip-of-the-Week
Tags: , , , , , ,

Get Empowered: Review Window and the Processing Method | Tip #28

By August 2, 2017
Empower tip-of-the-week

Empower Software can make signal-to-noise calculations in several different ways. Let’s begin by looking at the simple calculation of peak height divided by noise. (S/N Part 1)

Categories: Empower Tip-of-the-Week
Tags: , , , , , ,